UVEliteFutureproof your floors with the power of UV light.
UVElite is designed for high traffic commercial and residential environments.
This instant cure solution delivers the strongest, most durable, eco-friendly floors with minimal interruption.
As soon as UVElite is cured with a portable UV light, the floor is ready for high traffic, minimizing Early Use Damage.
A wise choice for busy commercial job sites and active households with a variety of flooring surfaces. UVElite can be used on hardwood floors to provide unrivaled durability, protection and ease of maintenance.
For more information regarding use of UVElite system as a maintenance and recoating system for a variety of floors such as on Sheet Vinyl, LVT, VCT and Linoleum. , please contact us or visit UVElite.com
Our toughest finish
Ideal for commercial settings
It's high-tech for floors
What are the benefits of UVElite for contractors?
UVElite helps meet your customer’s flooring needs and even exceed their expectations. Arboritec’s UVElite minimizes operational downtime with single-day project completion. Also, with UVElite, both you and floor owners never again have to be worry about early use damage to a recently finished floor. Using UVElite is the difference between being good, and being great. If you are one of those contractors who want to be on the cutting edge in this industry, you understand the importance of being the best, and strive to be leaders in your markets. Acceptable is not enough for you, nor is it for Arboritec.
Just like any other traditional finish systems, contractors charge homeowners based on the value the system provides. UVElite delivers convenience and is one of the most advanced and durable waterborne site applied finishes on the market today, so it deserves to be priced at a premium.
What are the benefits of UVElite for home owners?
Home owners benefit most from Arboritec’s UV curing system.
Instant use of the floor is one of the advantages of UVElite. The finish reaches maximum durability at the very moment it is hit by the light from the UV machine. This means convenience – no prolonged waiting period to allow the finish to reach its maximum durability, scratch, scuff, and chemical resistance. Renovation of a floor is an expensive investment, and you want it to last. With traditional cure systems, a large percentage of floor damage can occur in the initial curing phase, as pets are allowed on too quickly, rugs are replaced before they should be, floors are mopped too early, furniture is slid into place, etc. This early use damage is prevented with UVElite. Arboritec’s UVElite minimizes operational downtime with the speed of single-day project completion. Other waterborne finishes need 4-14 days to cure before heavy use.
UVElite is 40% more durable than other traditional two-component waterborne finishes. In fact, the durability, wear resistance, and chemical resistance are equal to that of some factory prefinished floors with lifetime warranties.
UVElite is safe. UVElite is free from NMP, isocynates, and has only 17 grams of VOCs (volatile organic compounds) per liter, making it among the most environmentally-friendly wood floor finishes on the market. It is completely solvent-free as well. With very low emissions, using UVElite means better indoor air quality and a safer environment for floor owners. The longer life of the finish also contributes to the overall sustainable life cycle of the process.
The look of a brand new floor, quickly. Arboritec´s innovative liquid ceramic and UV technology reinstate the durability and look similar to a factory pre-finished floor. Therefore, the application of UVElite is a much more time- and cost-effective alternative than replacement of the floor.
What are the advantages of Arboritec’s UVElite compared to other UV curing systems?
Faster and easier: Arboritec’s UVElite is the fastest and easiest UV curing system on the market. You only need to UV cure the floor once and after the final coat. You DON’T need to UV cure the floor after priming the floor, and not after intermediate coats of UVElite. There is also no need to sand and vacuum between coats of UVElite. In addition, UVElite has a significantly shorter drying time of 1-3 hours. As the fastest UV curing finish system, UVElite allows you to complete many jobs overnight and let the commercial floor owner be back open for business in the morning.
More durable: Arboritec’s UVElite is the most durable finishing solution in the market. Extensive Taber testing has shown that UVElite is about 40% more durable than the current market standard for 2-component waterborne finishes.
More environmentally safe. UVElite is free from NMP, isocyanates and solvents, and has less than 17g/l of VOCs making it among the most environmentally-friendly hard flooring surface coating solutions on the market.
Does UV curing affect other items close to the floor like cabinets, doors, wallpaper, etc.?
How does application of UVElite differ from standard systems?
Can I use UVElite system for all types of wood?
How can a surface coated with UVElite be recoated later?
Wood surfaces coated by UVElite can be recoated the same way as other waterborne finished floors.
How safe is the UVElite system?
UVElite is free from NMP, isocynates and solvents, and with a very low VOC (less than 17g/l), it is among the most environmentally safe hard flooring surface treatment solutions in the market. With very low harmful emissions, using UVElite means better indoor air quality environment for floor owners. However, just like any other standard finishing products, the usual precautions for handling chemical products should be considered.
When using UVElite, is floor prep work different from a standard floor recoat system?
On what types of floors can I use UVElite?
UVElite may be used on wood flooring as well as some other types. For more information regarding use of UVElite system as a maintenance and recoating system for a variety of floors such as on Sheet Vinyl, LVT, VCT and Linoleum, please contact us or visit UVElite.com
What are the recommended application systems for UVElite?
For heavy commercial floors (e.g. floors with street entrance), the recommended system is 1 coat of Arboritec First Coat Sealer + 1 Coat of Avenue + 2 coats of UVElite.
For commercial floors (e.g. floors with plenty of walkoff), the recommended Arboritec system is 1 coat of First Coat sealer + 2 coats of Avenue or 1 coat of Avenue + 1 coat of UVElite.
For a recoat, the recommended system is Clean n’ Coat + 1 coat of Avenue + 1 coat of UVElite
For more information regarding other systems please contact us.
Linoleum, Sheet Vinyl, LVT and VCT Flooring
What is the coverage rate of UVElite?
600-850 ft²/ gal.